Description

UNI EN 4823 cat. A Type 2 Medium Viscosity

Description

Two-component silicone elastomer (polyvinylsiloxane). Cured at room temperature by
room temperature curing by polyaddition, specifically formulated for the manufacture of
precision masks in dental technology.

Indications

CLEAR SIL is suitable for the manufacture of transparent templates for
– light-curing material moulding
– fibre moulding technique
– moulding and fixing of veneers
– production of combined denture teeth
– production of aesthetically individualised abutments on implants

Contraindications

Currently not known.

Side effects

Currently not known.

Processing

Remove the cap from the cartridge and apply the mixing tip (see packaging), then insert
the cartridge into the dispencer at a ratio of 1 : 1.
The dosing of base and hardener in a 1 : 1 ratio (volume or weight) and mixing
is done automatically by pushing the two components through the tip of the
cartridge.
The extrusion of the material must take place evenly and continuously until the
completion of the product.
The mixer tip acts as a stopper until the next processing step. For each application, use
a new tip.

Processing time: 1 minute.
Cure time: 15 minutes.
Time calculated with processing at room temperature (23°C / 73°F). High temperatures
accelerate polymerisation; lower temperatures slow polymerisation.

Packaging

CLEAR SIL polyvinylsiloxane conf. containing
no. 2 x 50 ml cartridges
no. 10 mixers
Single parts:
mixer conf. 50 p.
dispencer rap. 1:1

Warnings

– The mixing tip acts as a stopper until the next processing step. For each
application use a new tip.
– Substances containing heavy metal salts, hydrocarbons, epoxy resin catalysts
amines, sulphur and derivatives, may inhibit polymerisation.
Storage: 12-28°C / 54 – 82°F
The product has been developed for use in the dental field and must be used
according to the instructions for use. The manufacturer accepts no liability for damage
resulting from different or inappropriate use. The user is responsible for personally checking
the suitability of the product for its intended uses, especially if these uses are not
provided for in the operating instructions.